201....how to damage the chip

ValidStuff

✨ Tracks Seller ✨
Advanced Vendor
Joined
Oct 28, 2016
Messages
870
Likes
767
Points
793
I will try to explain in this post the chip system of the cards also knowen as 201.
201 same as 101 is a service card of a dump.Any card service code which starts with 201 include a chip.This system was introduced for decrease the fraud and stop the carding and carders.Well it seems that was a lost of time and money from card issuers because even if 201 is still considerated unbreakable(which i dont believe,chip reader and writter are available in market) the fraud is not stopped.

The 201 cards are cards which used both strip and chip system so carders should not be afraid of chip.Theree are some tricks to damage the chip and so the POS's cashiers will be forced to swipe the card for complete the transactions.Even if you are living in a country which use 101 system (swipe the magnetic strip) I won't recommend you to encode the 201 dumps on non-chip cards.Best solution is to encode your 201 dumps on chip cards and damage the chip.Of course is recommended to use embosser and preprinted plastic for the 201 dumps because when an error message will came on POS screen while trying to read the chip ,POS cashier may pay more attention to the card number and other card details.

1.The microwave system is one of the most common used to damage the chip but it also leave some easy to observe marks on the card but here you have it .Put your card in the microwave for 5 seconds.The chip antena will be damaged .To bad this method will also leave some visible evidences on the plastic.

2.Other carders prefer to pirce the chip with a sharp object.This method also make visible damages on the card and on an attent verification of the card it can be observed.Ops!

3.Cutting the chip antena will also leave the chip unsuable.But for do this you have to know exactly where the chip antena is :).This method do not do to evident damages.

4.The holy hammer method,haha well an ordinary hammer is used to smash the chip.If you chose to use this method make sure you will not make evident damages in the card.

There are also bad ideas which will kill the chip but also the magnetic stric off card so avoid!One of this methods is the electromagnet.You can use an electromagnet to generate an magnetic field that become induced and fry the chip...but also damage the magnetic strip.This method can be used to damage the chip of passports but not the chip of bank cards.
 

Christian093884

New Member
Registered User
Joined
Apr 17, 2020
Messages
1
Likes
0
Points
1
Age
25
I will try to explain in this post the chip system of the cards also knowen as 201.
201 same as 101 is a service card of a dump.Any card service code which starts with 201 include a chip.This system was introduced for decrease the fraud and stop the carding and carders.Well it seems that was a lost of time and money from card issuers because even if 201 is still considerated unbreakable(which i dont believe,chip reader and writter are available in market) the fraud is not stopped.

The 201 cards are cards which used both strip and chip system so carders should not be afraid of chip.Theree are some tricks to damage the chip and so the POS's cashiers will be forced to swipe the card for complete the transactions.Even if you are living in a country which use 101 system (swipe the magnetic strip) I won't recommend you to encode the 201 dumps on non-chip cards.Best solution is to encode your 201 dumps on chip cards and damage the chip.Of course is recommended to use embosser and preprinted plastic for the 201 dumps because when an error message will came on POS screen while trying to read the chip ,POS cashier may pay more attention to the card number and other card details.

1.The microwave system is one of the most common used to damage the chip but it also leave some easy to observe marks on the card but here you have it .Put your card in the microwave for 5 seconds.The chip antena will be damaged .To bad this method will also leave some visible evidences on the plastic.

2.Other carders prefer to pirce the chip with a sharp object.This method also make visible damages on the card and on an attent verification of the card it can be observed.Ops!

3.Cutting the chip antena will also leave the chip unsuable.But for do this you have to know exactly where the chip antena is :).This method do not do to evident damages.

4.The holy hammer method,haha well an ordinary hammer is used to smash the chip.If you chose to use this method make sure you will not make evident damages in the card.

There are also bad ideas which will kill the chip but also the magnetic stric off card so avoid!One of this methods is the electromagnet.You can use an electromagnet to generate an magnetic field that become induced and fry the chip...but also damage the magnetic strip.This method can be used to damage the chip of passports but not the chip of bank cards.
 
Top Bottom